TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download

Page 354 of 1158

TM 9-2320-366-20-5 19-8. AIR TRANSPORTABILITY HYDRAULIC SYSTEM SERVICE (CONT) (52) Connect hydraulic hose (27) to fitting (29). (53) Connect air hose (25) to 90-degree fitting (26). (54) Remove dipstick (41) from air/hydraulic power unit (34). (55) Fill air/hydraulic power unit (34) to second groove from bottom on dipstick (Appendix H). (56) Install dipstick (41) in air/hydraulic power unit (34) and hand tighten. (57) Start engine and allow air system to pressurize (TM 9- 2320-366-10-1). (58) Raise and lower cab using hydraulic manifold (TM 9- 2320-366-10-1) until hydraulic fluid is cleared of foam, grit, and other contaminants. (59) Repeat steps (54) through (56) as required. (60) Connect hydraulic hose (28) to fitting (30). 19-42