TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 352 of 1158
TM 9-2320-366-20-5 19-8. AIR TRANSPORTABILITY HYDRAULIC SYSTEM SERVICE (CONT) (42) Remove four screws (31), spring washers (32), washers (33) and air/hydraulic power unit (34) from spare tire retainer (24). Discard spring washers. (43) Remove air/hydraulic power unit (34) from vehicle. (44) Remove six screws (35), pump assembly (36) and gasket (37) from reservoir (38). Discard gasket. WARNING • Dry Cleaning Solvent (P-D-680) is TOXIC and flammable. Wear protective goggles and gloves; use only in well ventilated area; avoid contact with skin, eyes, and clothes, and do not breathe vapors. Keep away from heat or flame. Never smoke when using solvent; the flashpoint for Type I Dry Cleaning Solvent is 100°F (38°C) and for Type II is 130°F (50°C). Failure to comply may result in injury or death to personnel. • If personnel become dizzy while using Dry Cleaning Solvent, immediately get fresh air and medical help. If Dry Cleaning Solvent contacts skin or clothes, flush with cold water. If Dry Cleaning Solvent contacts eyes, immediately flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (45) Drain hydraulic oil from reservoir (38) and flush with dry cleaning solvent. 19-40