TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 35 of 1158
TM 9-2320-366-20-5 HOW TO USE THIS MANUAL OVERVIEW This Technical Manual (TM) is provided to help you maintain the MTV at the Unit Maintenance level. Because of its size, it is divided into five volumes. Volume 5 contains the following major sections in order of appearance: • WARNING SUMMARY. Provides a summary of the most important warnings that apply throughout the manual. • CHAPTER 17, MATERIAL HANDLING CRANES (MHC), 30K WINCHES, AND 15K SELF-RECOVERY WINCH MAINTENANCE • CHAPTER 18, BODY, CHASSIS, AND ACCESSORY ITEMS MAINTENANCE • CHAPTER 19, HYDRAULIC SYSTEM MAINTENANCE • CHAPTER 20, SPECIAL PURPOSE KITS MAINTENANCE • CHAPTER 21, ARMAMENT/SIGHTING AND FIRE CONTROL MATERIEL MAINTENANCE • CHAPTER 22, ELECTRICAL ILLUMINATING EQUIPMENT MAINTENANCE • CHAPTER 23, AIR SYSTEM MAINTENANCE • CHAPTER 24, GAGES (NON-ELECTRICAL) MAINTENANCE • APPENDIX A, REFERENCES. Lists publications used with the MTV. • APPENDIX B, MAINTENANCE ALLOCATION CHART. The maintenance allocation chart denotes the level of maintenance which performs specific maintenance tasks and the time required. It also lists tools and special tools required for each task. • APPENDIX C, TOOLS IDENTIFICATION LIST. Lists equipment used in the performance of maintenance and references publications which contain information regarding the equipment. • APPENDIX D, EXPENDABLE/DURABLE SUPPLIES AND MATERIALS LIST. Lists expendable and durable items used in the performance of maintenance. • APPENDIX E, ILLUSTRATED LIST OF MANUFACTURED ITEMS. Illustrates and describes items that must be fabricated from bulk materials for repair of the MTV. • APPENDIX F, TORQUE LIMITS. Lists the standard torque values for specific attaching hardware. • APPENDIX G, MANDATORY REPLACEMENT PARTS. • APPENDIX H, LUBRICATION ORDER. • APPENDIX J, ADDITIONAL AUTHORIZATION LIST (AAL). • APPENDIX K, TRANSMISSION/TRANSMISSION CONTROLS ADAPTABILITY CHART. Lists actions required to mate different transmission configurations with WTEC II or WTEC III controls. Change 1 v