TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 345 of 1158
TM 9-2320-366-20-5 b. Installation. (1) Install 90-degree fitting (1) in hydraulic latch (2). (2) Position hydraulic latch (2) on cab support assembly (3) with four screws (4), washers (5), and self-locking nuts (6). (3) Connect hydraulic hose (7) to 90-degree fitting (1). c. Adjustment. (1) Loosen four nuts (1) on hydraulic latch (2). NOTE Perform step (2) and note position of cab latching hook assembly when it is near hydraulic latch. (2) Lower cab (TM 9-2320-366-10-1). (3) Raise cab (TM 9-2320-366-10-1). (4) Position hydraulic latch (2) to engage cab latching hook assembly (3). (5) Tighten four self-locking nuts (1) to 34-44 lb-ft (46-60 N·m). (6) Lower cab (TM 9-2320-366-10-1). (7) Check cab latching hook assembly (3) for proper operation. (8) Perform steps (1) through (7), as required. Change 1 19-33