TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 334 of 1158
TM 9-2320-366-20-5 19-5. HYDRAULIC MANIFOLD FILTER REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Gloves, Rubber (Item 13, Appendix C) Goggles, Industrial (Item 15, Appendix C) Materials/Parts Hydraulic Fluid A (Item 25, Appendix D) Filter Assembly (2) (Item 14, Appendix G) a. Removal. WARNING Hydraulic fluid (MIL-L-5606) is TOXIC. Wear protective goggles and gloves; use only in well ventilated area; avoid contact with skin, eyes, and clothes. Skin and clothing that come in contact with hydraulic oil should be washed immediately. Saturated clothing should be removed immediately. Failure to comply may result in injury to personnel. (1) Remove two plugs (1) from hydraulic manifold (2). (2) Remove two preformed packings (3) from plugs (1). Discard preformed packings and plugs. (3) Remove two retainers (4), filters (5), and springs (6) from hydraulic manifold (2). Discard retainers, filters, and springs. 19-22