TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 332 of 1158
TM 9-2320-366-20-5 19-4. HYDRAULIC MANIFOLD REPLACEMENT/REPAIR (CONT) (37) Position spacer (61) on hydraulic manifold (2) with three screws (62). (38) Tighten two screws (62) to 72-120 lb-in. (8-14 N·m). (39) Position hinge (63) on spacer (61) with two screws (62). (40) Tighten two screws (64) to 18-22 lb-ft (24-30 N·m). (41) Position spacer (65) and cover (66) on hinge (63) with two screws (67) and self-locking nuts (68). (42) Tighten two self-locking nuts (68) to 18-22 lb-ft (24-30 N·m). (43) Position plate (69) and lanyard (70) on hydraulic manifold (2) with two screws (71). (44) Tighten two screws (71) to 18-22 lb-ft (24-30 N·m). (45) Close cover (66) and install retaining pin (72). f. Installation. (1) Connect eight hydraulic hoses (1) to fittings (2). (2) Connect two hydraulic hoses (3) to 45-degree fittings (4). (3) Connect four air hoses (5) to air fittings (6). 19-20.14 Change 1