TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 328 of 1158
TM 9-2320-366-20-5 19-4. HYDRAULIC MANIFOLD REPLACEMENT/REPAIR (CONT) (2) Install six preformed packings (4) on valves (5 and 6) and air valves (7 and 8). NOTE Lubricate parts with oil as required. (3) Install valves (5 and 6) and air valves (7 and 8) in hydraulic manifold (2). WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (4) Apply sealing compound to threads of three plugs (9). (5) Position preformed packing (10), check valve (11), setscrew (12), and plug (9) in CV4 orifice (13). (6) Position two check valves (11), preformed packings (10), spacers (14), setscrews (12), and plugs (9) in CV2 orifice (15) and CV3 orifice (16). (7) Tighten three plugs (9) to 21 lb-ft (28 N·m). 19-20.10 Change 1