TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 280 of 1158
TM 9-2320-366-20-5 18-11. PERSONNEL HEATER CONTROL GUARD REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 79, Appendix C) Wrench, Torque 0-200 lb-in. (Item 59, Appendix C) Socket Set, Socket Wrench (Item 34, Appendix C) a. Removal. Remove four screws (1), washers (2), and personnel heater control guard (3) from personnel heater (4). b. Installation NOTE Perform step (1) on vehicles not equipped with personnel heater guard. (1) Remove four screws (1) from personnel heater (2). Discard screws. 18-64