TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download

Page 269 of 1158

TM 9-2320-366-20-5 (60) Install three louvers (73) on cover (74). (61) Install cover (74) on personnel heater (2) with seven screws (75). (62) Position personnel heater control guard (76) on cover (74) with four washers (77) and screws (78). (63) Tighten four screws (78) to 39-59 lb-in. (4-7 N·m). (64) Install control panel (79) on personnel heater (2) with six screws (80). NOTE Perform steps (65) and (67) on vehicle serial numbers 0001 through 3696 equipped with original personnel heaters. (65) Position self-locking nuts (81) on DEFR control cable (19), VENT control cable (25), and HEAT control cable (57). (66) Position knobs (82, 83, and 84) on DEFR control cable (19), VENT control cable (25), and HEAT control cable (57). (67) Tighten self-locking nuts (81) on knobs (82, 83, and 84). 18-53