TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download

Page 268 of 1158

TM 9-2320-366-20-5 18-9. PERSONNEL HEATER REPLACEMENT/REPAIR (CONT) (48) Position HEAT control cable (57) on valve shaft (62) with matchmarks aligned. (49) Install cable clamp (63) on valve (61) with screw (64). (50) Install push nut (65) on valve shaft (62). (51) Position clamp (66) on hose (67). (52) Connect hose (67) to valve (61). (53) Tighten clamp (66) to 35-45 lb-in. (4-5 N·m). (54) Position hose (68) in personnel heater (2). (55) Install seal (69) on personnel heater coil (70). (56) Position personnel heater coil (70) in personnel heater (2). (57) Position clamps (71 and 72) on hoses (67 and 68). (58) Connect hoses (67 and 68) to personnel heater coil (70). (59) Tighten clamps (71 and 72) to 35-45 lb-in. (4-5 N·m). 18-52