TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 237 of 1158
TM 9-2320-366-20-5 Change 2 18-24.3 (14) Remove four screws (48), washers (49), and brackets (38 and 47) from cab (50). b. Installation. (1) Position brackets (1 and 2) on cab (3) with four washers (4) and screws (5). (2) Tighten four screws (5) to 80-98 lb-in. (9-11 N•m). (3) Position clip (6) and mirror arm (7) on lower bracket (1) with screw (8), washer (9), and self- locking nut (10). NOTE • Left and right cab mirrors are installed the same way. Left side shown. • Perform steps (1) through (11) on vehicles equipped with convex mirrors mounted with clamps.