Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download

Page 233 of 1158

TM 9-2320-366-20-5 Change 2 18-23 18-7. CAB MIRROR REPLACEMENT This task covers: a.Removal b. Installation INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Socket Set, Socket Wrench (Item 34, Appendix C) Tools and Special Tools (Cont) Screwdriver Attachment, Socket Wrench (Item 58, Appendix B) Materials/Parts Nut, Self-Locking (2) (Item 167, Appendix G) Nut, Self-Locking (2) (Item 138, Appendix G) Lockwasher (Item 105.3, Appendix G) a. Removal. (1) Remove nut (1), washer (2), convex mirror (3), and washer (2) from bracket (4). (2) Remove self-locking nut (5), washer (6), and bracket (4) from cab mirror (7). Discard self-locking nut. (3) Remove self-locking nut (8), washer (9), and cab mirror (7) from mirror arm (10). Discard self-locking nut. NOTE • Left and right cab mirrors are removed the same way. Left side shown. • Perform steps (1) and (7) convex mirror mounted with bracket.