TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 220 of 1158
TM 9-2320-366-20-5 18-4. WINDSHIELD WIPER MOTOR REPLACEMENT (CONT) (7) Remove three screws (10), washers (11), wiper motor (6), and wiper motor bracket (12) from vehicle. b. Installation. (1) Position wiper motor (1) and wiper motor bracket (2) on vehicle with three washers (3) and screws (4). (2) Tighten three screws (4) to 96-120 lb-in. (11-14 N·m). NOTE Use orientation noted from removal of wiper arm. (3) Install wiper arm (5) on wiper motor (1) with washer (6) and self-locking nut (7). NOTE Install plastic cable ties as required. (4) Connect connector PX22 (8) to wiper motor (1). 18-10