TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 219 of 1158
TM 9-2320-366-20-5 18-4. WINDSHIELD WIPER MOTOR REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-57). PDP cover removed (para 16-2). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Wrench Set, Socket (Item 51, Appendix C) Materials/Parts Ties, Cable, Plastic (Item 69, Appendix D) Nut, Self-Locking (Item 172, Appendix G) a. Removal. (1) Remove three screws (1) and washers (2) from PDP (3). (2) Remove three screws (4) from PDP (3). (3) Lift PDP (3) outward to gain access. NOTE Remove plastic cable ties as required. (4) Disconnect connector PX22 (5) from wiper motor (6). (5) Remove self-locking nut (7) and washer (8) from wiper motor (6). Discard self-locking nut. NOTE Note orientation of wiper arm prior to removal. (6) Remove wiper arm (9) from wiper motor (6). 18-9