TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 216 of 1158
TM 9-2320-366-20-5 18-3. WINDSHIELD WIPER AND NOZZLE REPLACEMENT This task covers: a. Removal b. Disassembly c. Assembly d. Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque 0-200 lb-in. (Item 59, Appendix C Socket Set, Socket Wrench (Item 51, Appendix C) Materials/Parts Washer, Spring (Item 292, Appendix G) Wiper, Refill (Item 297, Appendix G) a. Removal. NOTE All windshield wipers are removed the same way. Left side shown. (1) Disconnect windshield washer hose (1) from fitting (2). (2) Lift cover (3) at base of wiper arm (4). (3) Remove nut (5) and spring washer (6) from wiper arm shaft (7). Discard spring washer. NOTE Mark position of wiper arm prior to removal. (4) Remove wiper arm (4) from wiper arm shaft (7). 18-6 Change 1