TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 203 of 1158
TM 9-2320-366-20-5 Change 2 17-157 17-32. M1089 30K WINCH VALVE MANIFOLD ASSEMBLY REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Cleaning/Inspection d. Assembly e. Installation INITIAL SETUP Equipment Conditions Disconnect batteries (TM 9-2320-366-20-3). Air tanks drained (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Heater, Gun Type, Electric (Item 24, Appendix B) Materials/Parts Rag, Wiping (Item 50, Appendix D) Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Solder (Item 64, Appendix D) Insulation, Sleeving, Electrical (Item 29.2 Appendix D) Nut, Self-Locking (tem 137, Appendix G) Nut, Self-Locking (Item 133, Appendix G) Lockwasher (8) (Item 78, Appendix G) Sealant (Item 55.3, Appendix D) Personnel Required (2) a. Removal. (1) Remove two self-locking nuts (1), washers (2), washers (3), and screws (4) from top cover (5). Discard self-locking nuts. (2) Remove eight screws (6), lockwashers (7), washers (8), and top cover (5) from control panel (9). Discard lockwashers.