TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 194 of 1158
TM 9-2320-366-20-5 17-30. M1089 30K WINCH TENSIONER PNEUMATIC VALVE ASSEMBLY REPLACEMENT/REPAIR/ADJUSTMENT (CONT) e. Installation. NOTE LH and RH M1089 30K winch tensioner pneumatic valve assemblies are installed the same way. LH M1089 30K winch tensioner pneumatic valve assembly shown. (1) Position M1089 30K winch tensioner pneumatic valve assembly (1) on 30K winch frame (2) with two washers (3), screws (4), and self-locking nuts (5). (2) Tighten two self-locking nuts (5) to 96-120 lb-in. (11-14 N·m). (3) Position hoses (6 and 7) on two 90-degree fittings (8). (4) Position hose (9) on fitting (10). (5) Tighten hoses (6, 7, and 9) to 132-144 lb-in. (15-16 N·m). f. Adjustment. NOTE LH and RH M1089 30K winch tensioner pneumatic valve assemblies are adjusted the same way. LH M1089 30K winch tensioner pneumatic valve assembly shown. (1) Disconnect hose (1) from 90-degree fitting (2). (2) Pull out and turn knob (3) on regulating valve (4) fully counterclockwise. 17-148 Change 1