TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 190 of 1158
TM 9-2320-366-20-5 17-144 Change 2 17-30. M1089 30K WINCH TENSIONER PNEUMATIC VALVE ASSEMBLY REPLACEMENT/REPAIR/ADJUSTMENT This task covers: a.Removal b.Disassembly c. Cleaning/Inspection d. Assembly e. Installation f. Adjustment INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Air tanks drained (TM 9-2320-366-10-1). Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Nut, Self-Locking (2) (Item 134, Appendix G) Sealing Compound (Item 58.1, Appendix D) Rag, Wiping (Item 50, Appendix D) Solvent, Dry Cleaning (Item 65, Appendix D) Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) STE/ICE-R (Item 41, Appendix C) M1089 30K Winch Test Adapter (Item 7, Appendix E) Apron, Rubber (Item 3, Appendix C) Gloves, Rubber (Item 13, Appendix C) Goggles, Industrial (Item 15, Appendix C) a. Removal. (1) Disconnect hose (1) from fitting (2). (2) Disconnect hoses (3 and 4) from two 90-degree fittings (5). NOTE • LH and RH 30K winch tensioner pneumatic valve assemblies are removed the same way. LH M1089 30K winch tensioner pneumatic valve assembly shown. • Tag hoses and connection points prior to disconnecting.