TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 187 of 1158
TM 9-2320-366-20-5 d. Assembly. (1) Install two solenoid valves (1) on M1089 30K winch pneumatic manifold (2) with four captive screws (3). (2) Install two solenoid valves (4) on M1089 30K winch pneumatic manifold (2) with four captive screws (5). (3) Apply antiseizing tape to threads of eight plugs (6) and plug (7). (4) Install eight plugs (6) in M1089 30K winch pneumatic manifold (2). (5) Install plug (7) in M1089 30K winch pneumatic manifold (2) with mounting bracket (8). (6) Install two screws (9) in mounting bracket (8). CAUTION Cathode side (side with band) of rectifier must be attached to positive electrical lead (yellow). Failure to comply may result in damage to equipment. NOTE Rectifier should be attached as close to solenoid as possible. (7) Solder four rectifiers (10) to pairs of wires (11). (8) Position insulation sleeving (12) over four rectifiers (10). (9) Shrink sleeving (12) on four rectifiers (10). Change 1 17-141