TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 184 of 1158
TM 9-2320-366-20-5 17-29. M1089 30K WINCH PNEUMATIC MANIFOLD REPLACEMENT/REPAIR (CONT) NOTE Remove plastic cable ties as required. Tag wires and connection points prior to disconnecting. (3) Remove electrical tape from four connector splices (5). Discard electrical tape. (4) Cut eight wires (6) at each side of connector splices (5). Discard connector splices. NOTE Step (5) requires the aid of an assistant. (5) Remove four self-locking nuts (7), screws (8), washers (9), and M1089 30K winch pneumatic manifold assembly (10) from 30K winch frame (11). Discard self-locking nuts. b. Disassembly. NOTE Tag fittings and plugs prior to removal. (1) Remove tee fitting (1) and two plugs (2) from regulating valve (3). (2) Remove two screws (4) from mounting brackets (5). (3) Remove regulating valve (3) and mounting brackets (5) from pipe nipple (6). (4) Remove pipe nipple (6), six fittings (7), and two plugs (8) from M1089 30K winch pneumatic manifold (9). 17-138 Change 1