TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 168 of 1158
TM 9-2320-366-20-5 17-26. 15K SELF-RECOVERY WINCH (SRW) HOSE REPLACEMENT This task covers: a. Hydraulic Hose Locations b. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Goggles, Industrial (Item 15, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Wrench, Torque, 0-600 lb-ft (Item 60, Appendix C) Adapter Socket Wrench (Item 2, Appendix B) Adapter Socket Wrench (Item 1, Appendix C) Crowfoot Attachment, Socket Wrench (Item 9, Appendix B) Crowfoot Attachment, Socket Wrench (Item 10, Appendix B) Tools and Special Tools (Cont) Crowfoot Attachment, Socket Wrench (Item 11, Appendix B) Crowfoot Attachment, Socket Wrench (Item 12, Appendix B) Pan, Drain (Item 24, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Cap and Plug Set (Item 14, Appendix D) Ties, Cable, Plastic (Item 69, Appendix D) Oil, Lubricating, OE/HDO 10 (Item 42, Appendix D) Rag, Wiping (Item 50, Appendix D) a. Hydraulic Hose Locations. WARNING • Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. • Prolonged contact with lubricating oil (MIL-L-2104) may cause a skin rash. Skin and clothing that come in contact with lubricating oil should be thoroughly washed immediately. Saturated clothing should be removed immediately. Areas in which lubricating oil is used should be well ventilated to keep fumes to a minimum. Failure to comply may result in injury to personnel. CAUTION Cap or plug hoses and connection points to prevent contamination of 15K SRW hydraulic system. Failure to comply may result in damage to equipment. NOTE • Refer to Table 17-5. 15K Self-Recovery Winch (SRW) Hydraulic Hose Locations (All Models Except M1090/M1094) or Table 17-6. M1090/M1094 15K Self-Recovery Winch (SRW) Hydraulic Hose Locations for hose locations on the 15K SRW. It may not be necessary to remove all hydraulic hoses at one time. • Tag hoses and connection points prior to removal. • Remove plastic cable ties as required. • Remove clamps and support brackets as required. 17-122