TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 164 of 1158
TM 9-2320-366-20-5 17-25. WINCH CONTROL VALVE ASSEMBLY AND BRACKET REPLACEMENT (CONT) c. Removal (M1090/M1094). NOTE • Remove plastic cable ties as required. • Tag connectors and connection points prior to disconnecting. (1) Loosen two captive screws (1) and disconnect connectors L4 (2) and L5 (3) from winch control valve (4). CAUTION Cap or plug hoses and connection points to prevent contamination of hydraulic system. Failure to comply may result in damage to equipment. NOTE Tag hoses and connection points prior to disconnecting. (2) Disconnect four hoses (5) from winch control valve (4). (3) Disconnect two hoses (6) from winch control valve (4). 17-118