TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 162 of 1158
TM 9-2320-366-20-5 17-25. WINCH CONTROL VALVE ASSEMBLY AND BRACKET REPLACEMENT (CONT) (6) Remove five fittings (18) from winch control valve (2). (7) Remove five preformed packings (19) from fittings (18). Discard preformed packings. b. Installation (All Models Except M1090/M1094). (1) Install five preformed packings (1) on fittings (2). (2) Install five fittings (2) in winch control valve (3). (3) Position two brackets (4) on winch control valve (3) with four washers (5) and screws (6). (4) Tighten four screws (6) to 11-13 lb-ft (15-17 N·m). 17-116