TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 149 of 1158
TM 9-2320-366-20-5 (4) Remove two screws (9), self-locking nuts (10), mounting bracket (5), and mounting plate (11) from frame (12). Discard self-locking nuts. b. Front Pulley Installation. (1) Position mounting plate (1) and mounting bracket (2) to frame (3) with two screws (4) and self-locking nuts (5). (2) Tighten two self-locking nuts (5) to 114-140 lb-ft (155- 190 N·m). (3) Position two brackets (6) on mounting bracket (2) with two screws (7) and self-locking nuts (8). (4) Tighten two self-locking nuts (8) to 58-79 lb-ft (79-107 N·m). (5) Install cable pulley (9) on mounting bracket (2) with washer (10) and nut (11). 17-107