TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 148 of 1158
TM 9-2320-366-20-5 17-23. 15K SELF-RECOVERY WINCH (SRW) CABLE PULLEYS REPLACEMENT This task covers: a. Front Pulley Removal b. Front Pulley Installation c. Rear Pulley Removal d. Rear Pulley Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions 15K SRW cable extended approximately three feet (TM 9-2320-366-10-2). Cab raised (TM 9-2320-366-10-1). Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Tools and Special Tools (Cont) Hammer, Hand (Item 17, Appendix C) Gloves, Welder’s (Item 14, Appendix C) Goggles, Industrial (Item 15, Appendix C) Materials/Parts Nut, Self-Locking (2) (Item 158, Appendix G) Nut, Self-Locking (2) (Item 168, Appendix G) WARNING Cable can become frayed or contain broken wires. Frayed or broken wires can injure hands. Wear heavy leather-palmed work gloves when handling cable. Failure to comply may result in injury to personnel. a. Front Pulley Removal. (1) Remove 15K SRW cable (1) from front cable pulley (2). (2) Remove nut (3), washer (4), and cable pulley (2) from mounting bracket (5). (3) Remove two screws (6), self-locking nuts (7), and brackets (8) from mounting bracket (5). Discard self- locking nuts. 17-106