TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 145 of 1158
TM 9-2320-366-20-5 (7) Position roller bracket (5) and taillight bracket (10) on mounting bracket (11) with two screws (12) and self- locking nuts (13). (8) Position two screws (14) in mounting bracket (11) with two self-locking nuts (15). (9) Position two screws (16) in taillight bracket (10) with two self-locking nuts (17). (10) Tighten two screws (12) to 149-182 lb-ft (202-247 N·m). (11) Tighten two self-locking nuts (15) to 149-182 lb-ft (202- 247 N·m). (12) Tighten two screws (16) to 26-32 lb-ft (35-43 N·m). NOTE If straight shaft is being replaced, a replacement spring pin must be installed. (13) Apply grease to straight shaft (18) and inside of fairlead roller (19). NOTE Install straight shaft so that lubrication fitting faces toward bottom. (14) Install fairlead roller (19) and straight shaft (18) in roller bracket (5). 17-103