TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 144 of 1158
TM 9-2320-366-20-5 17-22. 15K SELF-RECOVERY WINCH (SRW) REAR ROLLER FAIRLEAD REPLACEMENT (CONT) b. Installation. (1) Apply grease to straight shafts (1 and 2) and inside of fairlead rollers (3 and 4). CAUTION Use a brass punch to install straight shafts. Failure to comply may result in damage to threads for lubrication fittings. NOTE • Install straight shafts so that lubrication fittings are toward curbside of vehicle. • Align hole in straight shafts with holes in bracket. (2) Install fairlead rollers (3 and 4) and straight shafts (1 and 2) in roller bracket (5). (3) Install two spring pins (6) through roller bracket (5) and straight shafts (1 and 2). (4) Apply grease to straight shaft (7) and inside of fairlead roller (8). NOTE • Install straight shaft so that lubrication fitting faces toward bottom. • Align hole in straight shaft with hole in bracket. (5) Install fairlead roller (8) and straight shaft (7) in roller bracket (5). (6) Install spring pin (9) through roller bracket (5) and straight shaft (7). 17-102