TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 126 of 1158
TM 9-2320-366-20-5 17-19. M1089 30K WINCH CABLE TENSIONER AIR CHAMBER REPLACEMENT (CONT) (4) Install air chamber (2), two lockwashers (3) and nuts (4) on winch tensioner support (5). CAUTION Tension arm must rest against 30K winch cable on drum when yoke is connected. Failure to comply may result in damage to equipment. (5) Position screw (6), yoke (7), and self-locking nut (8) on tensioner arm (9). (6) Tighten self-locking nut (8) to 76-84 lb-ft (103-114 N·m). (7) Tighten jamnut (10) to 12-24 lb-in. (1-3 N m). (8) Connect air hose (11) to 90 degree fitting (1). c. Adjustment. (1) Connect STE/ICE-R adapter and snubber to pressure regulator air hose (1). (2) Start engine and pressurize air tanks (TM 9-2320-366- 10-1). (3) Shut down engine (TM 9-2320-366-10-1). (4) Perform STE/ICE-R test number 50 (TM 9-4910-571- 12&P). (5) Turn pressure regulator adjustment knob (2) until a reading of 65 psi is noted on STE/ICE-R. 17-84