TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 117 of 1158
TM 9-2320-366-20-5 Change 2 17-78.1 c. Spelter Socket installation (1) Match mark 4 in. (102 mm) down from end of cable (1). (2) Wrap wire (2) around cable (1) at match mark until 1 in. (25mm) wide coil of wire is placed on cable. (3) Remove tape from end of cable (1). (4) Separate strands of wire (3) at end of cable (1) until wire reaches top edge of wrapped wire (2). (5) Fan separated wires (3) evenly on end of cable (1). CAUTION Ensure any fibers or plastic materials in separated strands of wire are removed. Failure to comply may result in inability of resin to bond to cable end.