TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 116 of 1158
TM 9-2320-366-20-5 17-78 Change 2 17-18. M1089 30K WINCH CABLE REPLACEMENT/REPAIR (CONT) (4) Loosen adjusting screw (5) on pay-out/spooler (6). (5) Remove 30K winch cable (3) from vehicle. b. Spelter Socket Removal. (1) Wrap tape around cable (1) as close to spelter socket (2) as possible to prevent fraying of cable end while cutting. (2) Position cable (1) and spelter socket (2) in vise, so half of taped cable end is showing. (3) Cut through taped part of cable (1) removing damaged spelter socket (2). Discard spelter socket. NOTE Release tension on pay-out/spooler sheaves by turning adjusting screw left eight to ten turns.