TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 111 of 1158
TM 9-2320-366-20-5 d. Assembly. (1) Install ball (1), spring (2), ball (3), spring (4), disk (5), and plug (6) in pump base (7). (2) Install preformed packing (8) in pump base (7). (3) Install wiper ring (9) in pump base (7). (4) Install preformed packing (10) in pump base (7). (5) Install pump piston (11) in pump base (7). WARNING Retaining clips are under tension and can act as projectiles when released causing severe eye injury. Use care when installing retaining clips. Failure to comply may result in injury to personnel. (6) Install pump linkage (12) on pump base (7) with pin (13) and two retaining clips (14). (7) Install pump socket (15) on pump linkage (12) with pin (16) and two retaining clips (17). (8) Install pump socket (15) on pump piston (11) with pin (18) and two retaining clips (19). 17-73