TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download

Page 994 of 1558

TM TM 9-2320-366-20-4 9-2320-366-20-4 14-9. M1083/M1084/M1085/M1086/M1093 SPARE TIRE RETAINER REPLACEMENT/ REPAIR This task covers: a. Removal b. Disassembly c. Assembly d. Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Spare tire removed (TM 9-2320-366-10-2). Cab raised (TM 9-2320-366-10-1). Hydraulic manifold removed (para 19-4). Tool box removed (para 16-17). Cab leveling valve removed (para 16-8). Air/hydraulic power unit and bracket removed (para 19-3). Ether starting aid removed (para 4-15). Shunt removed (para 7-29). 100 amp reverse polarity relay removed, if equipped (para 7-30). 200 amp reverse polarity relay removed, if equipped (M1093) (para 20-47). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Pan, Drain (Item 24, Appendix C) Gloves, Rubber (Item 13, Appendix C) Tools and Special Tools (Cont) Goggles, Industrial (Item 15, Appendix C) Socket Set, Socket Wrench (Item 36, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Cap and Plug Set (Item 14, Appendix D) Ties, Cable, Plastic (Item 69, Appendix D) Nut, Self-Locking (12) (Item 156, Appendix G) Nut, Self-Locking (4) (Item 128, Appendix G) Pin, Cotter (2) (Item 231, Appendix G) Personnel Required (3) a. Removal. CAUTION Cap or plug intake air cleaner hoses to prevent contamination of turbocharger. Failure to comply may result in damage to turbocharger and engine. (1) Loosen clamp (1) on intake air cleaner boot (2). (2) Disconnect intake air cleaner boot (2) from intake air cleaner housing (3). (3) Loosen clamp (4) on air compressor intake hose (5). (4) Disconnect air compressor intake hose (5) from intake air cleaner boot (2). 14-64 14-64