TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 992 of 1558
TM 9-2320-366-20-4 14-62 Change 2 14-8. M1088 PLATFORM AND BRACKETS REPLACEMENT/REPAIR (UNMODIFIED) (CONT) d. Platform Assembly. (1) Position floor plate (1) on platform (2) with three screws (3) and self-locking nuts (4). (2) Tighten three self-locking nuts (4) to 20-30 lb-ft (27-41 N•m). e. Bracket Removal. (1) Remove four self-locking nuts (1), screws (2), and two front brackets (3) from frame (4). Discard self- locking nuts. (2) Remove four self-locking nuts (5), screws (6) and two rear brackets (7) from frame (4). Discard self- locking nuts. NOTE Number of fasteners will vary from floor plate to floor plate. Refer to Table 14-1, M1088 Platform Attaching Hardware for number of fasteners required. Floor plate B shown.