TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 988 of 1558
TM 9-2320-366-20-4 14-58 Change 2 14-8. M1088 PLATFORM AND BRACKETS REPLACEMENT/REPAIR (MODIFIED) This task covers: a. Platform Removal b. Platform Installation c. Platform Disassembly d. Platform Assembly e. Bracket Removal f. Bracket Installation g. Follow-On Maintenance INITIAL SETUP Equipment Conditions Upper platform removed (para 14-7). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Sling, Cargo (Item 31, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Goggles, Industrial (Item 15, Appendix C) Wrench, Torque, 0-600 lb-ft (Item 60, Appendix C) Wrench Set, Socket (Item 50, Appendix C) Material/Parts Nut, Self-Locking (8) (Item 156, Appendix G) Nut, Self-Locking (4) (Item 169, Appendix G) Nut, Self-Locking (7) (Item 154, Appendix G) Nut, Self-Locking (6) (Item 158, Appendix G) Personnel Required (3) a. Platform Removal. (1) Remove two self-locking nuts (1) and screws (2) from bracket (3). Discard self-locking nuts. (2) Remove two self-locking nuts (4), insulation washers (5), washers (6), screws (7), and fender (3) from platform (8). Discard self-locking nuts. WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. NOTE Left and right side fenders are removed the same way. Right side shown.