TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 982 of 1558
TM TM 9-2320-366-20-4 9-2320-366-20-4 14-7. M1088 UPPER PLATFORM REPLACEMENT (CONT) c. Assembly WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. Failure to comply may result in injury to personnel. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. NOTE Perform steps (1) through (14) on vehicles equipped with gladhand selector valves. (1) Apply antiseize compound to inside threads of fittings (1 and 2). (2) Install two labels (3) and fittings (1 and 2) in platform (4) with two washers (5) and nuts (6). (3) Apply antiseize compound to threads of two 45-degree fittings (7). (4) Install two 45-degree fittings (7) in fittings (1 and 2). (5) Install two gladhand selector valves (8) in fittings (1 and 2). (6) Install pedestal (9) on platform (4) with washer (10), lockwasher (11) and nut (12). (7) Install two dummy connectors (13) on pedestal (9) with two screws (14) and self-locking nuts (15). (8) Install eye ring (16) in pedestal (9) with self-locking nut (17). 14-52 14-52