TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 978 of 1558
TM 9-2320-366-20-4 14-7. M1088 UPPER PLATFORM REPLACEMENT This task covers: a. Removal b. Disassembly c. Assembly d. Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Air tanks drained (TM 9-2320-366-10-1). Worklight assembly removed (para 7-42). M1088 mounting bracket removed (para 14-6). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Wrench, Torque, 0-75 lb-in. (Item 90, Appendix B) Goggles, Industrial (Item 15, Appendix C) Materials/Parts Washer, Spring (8) (Item 296, Appendix G) Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Antiseize Compound (Item 58, Appendix D) Nut, Self-Locking (2) (Item 156, Appendix G) Nut, Self-Locking (2) (Item 169, Appendix G) Nut, Self-Locking (2) (Item 154, Appendix G) Nut, Self-Locking (3) (Item 155, Appendix G) Lockwasher (Item 89, Appendix G) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal NOTE • Vehicle serial numbers 0001 through 2359 were not originally equipped with gladhand selector valves. Vehicle serial numbers 2360 and higher are equipped with gladhand selector valves. M1088 with gladhand selector valves shown. • Tag hoses and connection points prior to disconnecting. (1) Disconnect two air hoses (1) from 45-degree fittings (2). NOTE Perform steps (2) and (3) on vehicles equipped with gladhand selector valves. (2) Disconnect hose (3) from 90-degree fitting (4). (3) Disconnect hose (5) from 90-degree fitting (6). 14-48 Change 1