TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 976 of 1558
TM 9-2320-366-20-4 14-6. M1088 MOUNTING BRACKET REPLACEMENT (CONT) (4) Disconnect connector P53M (13) from connector J53 (14). (5) Disconnect connector P52M (15) from connector J52 (16). (6) Remove four nuts (17), lockwashers (17.1), screws (18), cover (19), and rear intervehicular 24 vdc cable (20) from mounting bracket (3). Discard lockwashers. (7) Remove two self-locking nuts (21), screws (22), washers (23), and rear intervehicular 12 vdc cable (24) from mounting bracket (3). Discard self-locking nuts. b. Installation. (1) Position rear intervehicular 12 vdc cable (1) on mounting bracket (2) with two washers (3), screws (4), and self- locking nuts (5). (2) Tighten two self-locking nuts (5) to 97-123 lb-in. (11-14 N·m). (3) Position rear intervehicular 24 vdc cable (6) on mounting bracket (2) with cover (7), four screws (8), lockwashers (8.1), and self-locking nuts (9). (4) Tighten four self-locking nuts (9) to 97-123 lb-in. (11-14 N·m). 14-46 Change 1