TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 975 of 1558
TM 9-2320-366-20-4 14-6. M1088 MOUNTING BRACKET REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-57). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Wrench Set, Socket (Item 51, Appendix C) Material/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Washer, Spring (2) (Item 289, Appendix G) Washer, Spring (2) (Item 296, Appendix G) Nut, Self-Locking (6) (Item 128, Appendix G) Lockwasher (4) (Item 112, Appendix G) NOTE Vehicle serial numbers 0001 through 2359 were not originally equipped with gladhand selector valves. Vehicle serial numbers 2360 and higher are equipped with gladhand selector valves. M1088 without gladhand selector valves shown. a. Removal. (1) Remove four self-locking nuts (1), screws (2) and mounting bracket (3) from platform (4). Discard self- locking nuts. NOTE Tag wires and connection points prior to disconnecting. (2) Remove two nuts (5), spring washers (6), screws (7), and dust cap lanyards (8) from mounting bracket (3). Discard spring washers. (3) Remove two nuts (9), spring washers (10), and connectors P134 (11) and P133 (12) from mounting bracket (3). Discard spring washers. Change 1 14-45