TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 955 of 1558
TM TM 9-2320-366-20-4 9-2320-366-20-4 (8) Position bracket (13) on front cooler bracket (14) with two screws (15), four washers (16), and two self-locking nuts (17). (9) Tighten two self-locking nuts (17) to 33-37 lb-ft (45-50 N·m). WARNING Adhesive sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (10) Apply sealing compound to threads of two screws (18 and 19). NOTE Step (11) requires the aid of an assistant. (11) Position two isolators (20) on catwalk (21) with two washers (22) and screws (18). (12) Position two isolators (23) on catwalk (21) with two screws (19). (13) Tighten two screws (18 and 19) to 33-47 lb-ft (45-64 N·m). 14-27 14-27