TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 940 of 1558
TM 9-2320-366-20-4 14-4. M1089 CATWALKS REPLACEMENT This task covers: a. 30K Winch Frame Catwalk Removal b. 30K Winch Frame Catwalk Installation c. Center Catwalk Removal d. Center Catwalk Installation e. Left Catwalk Removal f. Left Catwalk Installation g. Control Panel/Hand Rail Catwalk Removal h. Control Panel/Hand Rail Catwalk Installation i. Right Catwalk Removal j. Right Catwalk Installation INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-175 lb ft (Item 58, Appendix C) Goggles, Industrial (Item 15, Appendix C) Materials/Parts Sealing Compound (Item 57, Appendix D) Nut, Self-Locking (2) (Item 147, Appendix G) Materials/Parts (Cont) Nut, Self-Locking (50) (Item 146, Appendix G) Nut, Self-Locking (2) (Item 149, Appendix G) Nut, Self-Locking (2) (Item 148, Appendix G) Lockwasher (2) (Item 96, Appendix G) Lockwasher (8) (Item 100, Appendix G) Lockwasher (6) (Item 102, Appendix G) Pin, Cotter (2) (Item 235, Appendix G) Personnel Required (2) a. 30K Winch Frame Catwalk Removal. NOTE Left and right side 30K winch catwalks are removed the same way. Left side shown. (1) Open catwalk (1) to gain access. NOTE Step (2) requires the aid of an assistant. (2) Remove three self-locking nuts (2), and screws (3) from hinge (4). Discard self-locking nuts. (14-11 Blank)/14-12 Change 1