TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 932 of 1558
TM 9-2320-366-20-4 Section II. MAINTENANCE PROCEDURES 14-2. FRONT BUMPER REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Blackout drive light removed (para 7-37). Composite front light assemblies removed (para 7-40). Gravel deflector and gravel deflector extension removed (para 14-13). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Socket Set, Socket Wrench (Item 36, Appendix C) Materials/Parts Nut, Self-Locking (4) (Item 165, Appendix G) Nut, Self-Locking (2) (Item 128, Appendix G) Lockwasher (2) (Item 113, Appendix G) Personnel Required (2) a. Removal. WARNING • Leave shackles installed in front bumper to support front bumper until ready to remove. Failure to comply may result in injury to personnel. • Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. (1) Deleted. (2) Deleted. 14-2 Change 1