TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 921 of 1558
TM 9-2320-366-20-4 Change 2 13-31 (16) Loosen screw (20) in clamp (21) as far as possible without disengaging screw from D-nut (22). (17) Unhook clamp tabs (23) from tab windows (24). (18) Position clamp (21) on return hose (25). (19) Connect return hose (25) on power steering pump reservoir (11). (20) Engage as many clamp tabs (23) as possible in tab windows (24) allowing little or no play between clamp (21) and return hose (25). (21) Tighten clamp (21) to 8-9 lb-in. (1 N•m). CAUTION Clamp tongue must be started in clamp groove. Failure to comply may result in damage to equipment.