Sign up to sell your inventory with NSN Lookup

TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download

Page 914 of 1558

TM 9-2320-366-20-4 13-26 Change 1 13-8. POWER STEERING PUMP RESERVOIR AND BRACKET REPLACEMENT This task covers: a.Removal b.Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Auxiliary starter solenoid removed (para 7-6). Power steering pump reservoir drained (Appendix H). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Dispensing Pump, Hand Driven (Item 5, Appendix C) Wrench, Torque, 0-75 lb-in. (Item 90, Appendix B) Materials/Parts Cap and Plug Set (Item 14, Appendix D) Oil, Lubricating, OE/HDO 10 (Item 42, Appendix D) Nut, Self-Locking (2) (Item 156, Appendix G) Clamp (Item 8, Appendix G) Clamp (Item 9, Appendix G) a. Removal. (1) Pry hose clamp end (1) open. (2) Disconnect return hose (2) from power steering pump reservoir (3). (3) Remove hose clamp (1) from return hose (2). Discard hose clamp. CAUTION Cap or plug hydraulic connections to prevent contamination of power steering system. Failure to comply may result in damage to equipment. NOTE Perform steps (1) through (3) on vehicles that have not previously had a power steering pump reservoir or power steering return hose replaced.