TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 905 of 1558
TM 9-2320-366-20-4 Change 2 13-17 (9) Remove two self-locking nuts (7), screws (8), and clamps (9) from return hose (2). Discard self- locking nuts. (10) Remove return hose (2) from vehicle. b. Return Hose Installation. (1) Install hose clamp (1) and return hose (2) on steering gear box (3). (2) Loosen screw (4) in clamp (5) as far as possible without disengaging screw from D-nut (6). (3) Unhook clamp tabs (7) from tab windows (8). NOTE Remove plastic cable ties as required.