TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 903 of 1558
TM 9-2320-366-20-4 Change 2 13-15 13-7. POWER STEERING HOSES AND TUBE REPLACEMENT This task covers: a.Return Hose Removal b.Return Hose Installation c. Pressure Hose Removal d.Pressure Hose Installation e. Suction Hose and Tube Removal f. Suction Hose and Tube Installation g. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Cab raised (TM 9-2320-366-10-1). Power steering reservoir drained (Appendix H) Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Goggles, Industrial (Item 15, Appendix C) Dispensing Pump, Hand Driven (Item 5, Appendix C) Tools and Special Tools (Cont) Wrench, Torque, 0-75 lb-in. (Item 90, Appendix B) Materials/Parts Cap and Plug Set (Item 13, Appendix D) Ties, Cable, Plastic (Item 69, Appendix D) Oil, Lubricating, OE/HDO 10 (Item 42, Appendix D) Nut, Self-Locking (2) (Item 150, Appendix G) Clamp (Item 8, Appendix G) Clamp (Item 9, Appendix G) a. Return Hose Removal. (1) Loosen hose clamp (1) on return hose (2). (2) Disconnect return hose (2) from steering gear box (3). WARNING CAUTION Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. Cap or plug hydraulic connections to prevent contamination of power steering system. Failure to comply may result in damage to equipment.