TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 898 of 1558
TM 9-2320-366-20-4 13-5. FRONT WHEEL TOE-IN ALIGNMENT/ADJUSTMENT (CONT) NOTE Chains may not be equal distance from flat surface. High end of gage may require adjustment to level out chains. (4) Adjust wheel alignment gage until both chains are touching flat surface. NOTE If toe-in is out of alignment perform Toe-In Adjustment. (5) Wheel alignment gage pointer should read 0 to 1/8 in. b. Toe-In Adjustment. (1) Loosen nuts (1) on tie rod clamps (2). NOTE Proper toe-in is 0 to 1/8 in. (2) Observe movable scale and rotate tie rod (3) to obtain proper toe-in measurement. (3) Tighten nuts (1) on tie rod clamps (2). (4) Remove wheel alignment gage from front tires. End of Task. 13-10