TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 897 of 1558
TM 9-2320-366-20-4 13-5. FRONT WHEEL TOE-IN ALIGNMENT/ADJUSTMENT This task covers: a. Toe-In Alignment Check b. Toe-In Adjustment INITIAL SETUP Equipment Conditions Vehicle parked on flat surface (TM 9-2320-366- 10-1). Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Goggles, Industrial (Item 15, Appendix C) Gage, Wheel Alignment (Item 12, Appendix C) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Toe-In Alignment Check. (1) Place wheel alignment gage between front of front tires with both chains touching flat surface. (2) Adjust movable scale on wheel alignment gage until pointer is at zero. (3) Move vehicle forward until wheel alignment gage is at rear of wheels and at least one chain is touching flat surface. 13-9