TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 894 of 1558
TM 9-2320-366-20-4 13-4. TIE-ROD REPLACEMENT (CONT) b. Disassembly. NOTE • Count exposed threads on tie rod end to assist in installation. • Note orientation of clamp on tie rod end prior to removal. • Left and right tie rod ends are removed the same way. Left side shown. (1) Loosen nut (1) on tie rod clamp (2). (2) Remove tie rod end (3) from tie rod (4). Discard tie rod end. c. Assembly. NOTE • Use number of threads counted from disassembly. • Left and right tie rod ends are installed the same way. Left side shown. (1) Position tie rod end (1) on tie rod (2) with same number of threads showing as from removal. (2) Tighten nut (3) on tie rod clamp (4) to 140-180 lb-ft (190- 244 N·m). 13-8 Change 1