TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 89 of 1558
TM 9-2320-366-20-4 (14) Install PDP (15) in dashboard (12) with three screws (16). (15) Install three washers (17) and screws (18) in PDP (15). (16) Position grille (19) on cab (2) with washer (20) and screw (21). (17) Position two washers (22) and screws (23) in grille (19). (18) Tighten screw (21) to 48-60 lb-in. (5-7 N·m). (19) Tighten two screws (23) to 24 lb-in. (3 N·m). (20) Install rear lights cable assembly (1) in clamp (24). NOTE Other terminal lugs may be installed with clamp and rear lights cable assembly. (21) Position two terminal lugs TL101 (25), TL83 (26), and clamp (24) on right frame rail ground stud (27) with self- locking nut (28). (22) Tighten self-locking nut (28) to 84-108 lb-in. (10-12 N·m). Change 1 7-411