TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 883 of 1558
TM 9-2320-366-20-4 Change 2 12-25/(12-26 Blank) 12-10. RIM COVER REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1) Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque 1-175 lb-in (Item 58, Appendix C) a. Removal. Remove four bolts (1), washers (2), and rim cover (3) from wheel (4). b. Installation (1) Position rim cover (1) on wheel (2) with four washers (3) and bolts (4). (2) Tighten four bolts (1) to 71-95 lb-ft (96-128 N•m). End of Task. NOTE Slotted hole in rim cover is aligned with pressure valve extension.